Total Care Club

During a check-up our Service Experts will inspect the following to ensure your system is running optimally.

• Check condenser coil
• Check evaporator coil
• Check blower motor
• Check refrigerant charge
• Lubricate motor, bearings, and fans (if applicable) Check and tighten all electrical connections Check temperature and pressures
• Check thermostat for proper operation
• Check and labeling of emergency shutoffs
• Check controls and safety devices
• Check capacitors
• Check condensate drain
• Check relays and contractors for proper operation Check ductwork for leaks
• Check proper amperage and voltage of A/C system Start and test operation and cycle of unit
• Check air flow
• Check humidifier/dehumidifier

By keeping your central A/C system in top working order with annual maintenance, you can cut your monthly energy costs by about 25% and reduce breakdowns by as much as 95%! 

During a check-up our Service Experts will inspect the following to ensure your system is running optimally.

• Check all wiring in main panel for proper sizing
• Check breakers for proper operation
• Check all aluminum wiring in service panel for oxidation and
  apply deoxidation compound as needed
• Check outside meter and enclosure
• Check outside main feeders
• Check ground fault protection for proper operation
• Check surge protectors
• Check attic fans for proper operation
• Check exhaust fans for proper operation
• Check all accessible lights, switches, dimmers, receptacles,
  ceiling fans
• Check all connections to major appliances
• Check all main service grounding and tighten as needed
• Check any exposed wiring in attic, basement and garages
• Check any outside and inside disconnects
• Check grounding and connections

Electrical fires cause approximately $1.6 billion in property damage each year. Old wiring, overloaded circuits, and worn outlets are the main culprits that can cause electrical shocks and fires.

During a check-up our Service Experts will inspect the following to ensure your system is running optimally.

• Check water pressure
• Test drinking water
• Check washing machine hoses
• Check all faucets for leaks to ensure proper operation
• Dye test toilets to check for leaks to ensure proper operation
• Check all drains for proper flow
• Provide BioOne treatment to all drains and toilets
• Camera inspection of sewer line (*Drain line must be clear
  and have accessible cleanout)
• Check garbage disposals for proper operation
• Check all emergency shutoff valves for proper operation
• Label all shutoffs at locations
• Check all under sink traps and shutoffs
• Check main water meter
• Check all outside spigots
• Water heater check off

Did you know that one leaking toilet and a dripping faucet can waste over 50,370 gallons of water a year?

During a check-up our Service Experts will inspect the following to ensure your system is running optimally.

• Check all the burners for proper operation
• Check thermocouple for proper operation
• Check the heat exchanger surface
• Check the flue pipe
• Lubricate pumps, bearings, and fans (if applicable)
• Check the inducer and blower motors
• Check and tighten all electrical connections
• Check the safety switch and controls
• Check the pilot assembly
• Check temperature and pressures
• Check thermostat for proper operation
• Check drain lines and traps for proper function
• Test and label of emergency shutoffs
• Check gas valve
• Check zone valves
• Check expansion tank
• Check aquastat, relay and water regulator
• Check air flow across indoor coil and blower wheels
• Check ductwork for leaks
• Start and test operation and cycle of unit
• Check air flow
• Check humidifier/dehumidifier

Annual checkups can prevent over 70% of all furnace repairs as well as improve your system’s efficiency by up to 16% — saving you money!